Search found 276 matches
- Tue Oct 28, 2014 7:32 pm
- Forum: Want to Buy - Sell - Trade
- Topic: Injection pump bolt
- Replies: 2
- Views: 2908
Re: Injection pump bolt
Do you have paypal?
- Sat Oct 25, 2014 7:23 pm
- Forum: Want to Buy - Sell - Trade
- Topic: Injection pump bolt
- Replies: 2
- Views: 2908
Injection pump bolt
Looking for a out injection pump banjo bolt.
- Sun Sep 28, 2014 6:49 pm
- Forum: Want to Buy - Sell - Trade
- Topic: For sale five speed FF transmission
- Replies: 0
- Views: 97775
For sale five speed FF transmission
I have a good five speed FF trans for sale it's all cleaned and painted silver. 225.00 obo
- Sun Sep 28, 2014 6:39 pm
- Forum: VW Diesel (General)
- Topic: 90 mm transmission axel flange swap to 100mm flange
- Replies: 2
- Views: 3087
Re: 90 mm transmission axel flange swap to 100mm flange
I was going to swap the 100mm flanges from a 1997 Jetta to my old style ff trans. After some research I found out the 100mm flange will hit the case so it needs to be ground down to make them fit. There is a good chance of going thru the trans case so I decided not to do it. I was going to use the f...
- Mon Sep 22, 2014 6:26 pm
- Forum: VW Diesel (General)
- Topic: 90 mm transmission axel flange swap to 100mm flange
- Replies: 2
- Views: 3087
90 mm transmission axel flange swap to 100mm flange
I have a great working ff five speed trans with 90 mm flanges on the trans. I want to swap in 100mm flanges. Anyone on here done that before. I think it will work just looking to confirm it will work.
Thanks
Thanks
- Fri May 30, 2014 4:21 pm
- Forum: VW Diesel (General)
- Topic: Hydro head on mechanical block
- Replies: 2
- Views: 2273
Re: Hydro head on mechanical block
The valve guides on my Mach. Block is al worm out. So I found a great deal on a compleat hydro engine for 125.00. The valve guides are almost perfect on the hydro head. That is why I am considering using the hydro head.
- Sun May 25, 2014 9:50 pm
- Forum: VW Diesel (General)
- Topic: Hydro head on mechanical block
- Replies: 2
- Views: 2273
Hydro head on mechanical block
I know this been gone over before but I can't find a compleat post on how to do this. I have a 1.6 hydro head that I want to put on a mechanical block. I know the extra drain hole in the head needs to be plugged but will it need to be resurfaced at the plugged hole? Do I use a mech head gasket or hy...
- Fri Jan 10, 2014 7:37 am
- Forum: VW Diesel (General)
- Topic: block heater
- Replies: 42
- Views: 17342
Re: block heater
I put a block heater in my rabbit truck also. I jacked the truck up and got a long 3/8 ratchet extension snaked it up thru the bottom of the truck and placed the end of the extension in the middle of the center freeze plug. Then take a b.f.h. and pound on the extension until the plug tips out of the...
- Sat Dec 14, 2013 7:35 pm
- Forum: VW Diesel (General)
- Topic: Diesel troubles
- Replies: 11
- Views: 4524
Re: Diesel troubles
My tank also had a dent in the center. I took the tank off and plugged all the openings. I used an air fitting and put air in the tank. The dent came right out. It didn't take much air pressure
- Mon Nov 25, 2013 7:26 pm
- Forum: VW Diesel (General)
- Topic: valve adjusting shims
- Replies: 3
- Views: 2602
Re: valve adjusting shims
Great that is what I was hoping to hear. The ones that are a little rusted I will clean them and flip over. This long weekend will be a good time to get them adjusted. Thanks
- Mon Nov 25, 2013 6:41 pm
- Forum: VW Diesel (General)
- Topic: valve adjusting shims
- Replies: 3
- Views: 2602
valve adjusting shims
So i am getting ready to adjust my valves, after looking at my stash of shims i have found that some of them have rust on one side. Anyone know if both sides can be used? I am wondering if one or both sides are hardened. If both sides are hardened I will just flip the shim over and put the rusted si...
- Fri Jun 07, 2013 10:37 pm
- Forum: VW Diesel (General)
- Topic: loud Ticking noise
- Replies: 3
- Views: 2289
Re: loud Ticking noise
Yep I would check oil pressure as well, my first thought was the bearing on the intermediate shaft.
- Fri Jun 07, 2013 1:34 pm
- Forum: VW Diesel (General)
- Topic: Windshield 1984 Rabbit
- Replies: 0
- Views: 10002
Windshield 1984 Rabbit
Has anyone change from the glued in windshield to the thick rubber gasket and 1981 windshield? I can't find a windshield for the 84 rabbit with glued in windshield anywhere.
- Sat Mar 30, 2013 9:28 pm
- Forum: VW Diesel (General)
- Topic: 1999 passat engine swap?
- Replies: 1
- Views: 1815
1999 passat engine swap?
I found a real nice 1999 Passat with a blown engine. Will a 1.6 diesel fit in this car? I know I will have to do work to make the electirical and fuel work but will the engine fit?
- Sat Mar 30, 2013 9:01 pm
- Forum: VW Diesel (General)
- Topic: Weird idle when cold
- Replies: 3
- Views: 3437
Re: Weird idle when cold
It's not surging it jumps up about 100 rpm and stays. It only happens when cold and it sets idling for about 10 mins. I added a k14 turbo when I rebuilt the engine about two years ago. It has a n/a pump.