Former VWDieselParts.com Forum

New push on terminal and a little bit of corroded wire cut back on one (several replaced, not sure which fixed it) of the brown ground wires leading to the star connectors behind the fuse block fixed problem.

New turn signal flasher relay fixed the partially illuminated turn signal led.

No HL are not supposed to come on with switch only part way. I agree seems like a bad ground or short Where do the hl and HL switch ground? If I can find out where the circled wire goes I think I will be able to start making progress. One more detail the wire paired (red from back of fuse block beco...

Full disclaimer. Just bought this van, Bentley is on the way. Key off-headlights and tail come on w/ hl switch in full on position. Key on- with hl switch to middle "running light" position; hl and taillights come on, turn signals work for rear but front turn signals and hazards flash the ...

Well I can report back with success, probably due to the diesel purge! I ran one can of diesel purge through and a lot of the smoke went away but still no power under load. I left it there idling (running from tank of fuel) and after probably 1/2 hour of idling, all of a sudden the engine revved rea...

Looking for quick input on getting a 1.6td running enough to get it home where I have dial indicator etc. Right now it is running direct from a (clean) fuel tank with clear lines, no air bubbles, with inline 12v pump just in case that could help. Symptoms; heavy white smoke, all the time. Actually: ...

Looking for metal lines from 1.6 turbo jetta or if you think you can bend YOUR set of 1.6NA lines to make them work, I would buy those. Offer to pay around $40, shipped... maybe A LITTLE more if you can throw in some used injectors. ...If you have a set of used 1.6td injectors in usable (don't have ...

Looking for a used set of metal injection lines for the rabbit 1.6L NA diesel. Please send price quote, incl. shipping to zip 98227, to my email: purvisgs (at) yah00 (dot) c0m. Please do not send pm.

Thank you so much!

1.9TD AAZ IP from 97 jetta, used, working condition, "timing gear" off - NOTE- this IP will not fit easily on the older style 1.9AAZ engine bracket/ timing cover, willing to trade for used, working earlier style 1.9td IP. Price $250 firm plus shipping. This is less than what I paid. number...

Sooner would be better, but timeline could be quite flexible if necessary

Thanks. Please send email if interested

Hi, I have a 1.9TD AAZ IP from a 94 that is leaking. It is the "LDA" vent, so a relatively minor leak that requires removing the head of the pump. Ideally I would like all the seals replaced in the pump though. I also have (extras), hopefully to trade: -1.9TD AAZ IP from 97, used, working ...

I have all this from a mk1 rabbit with ac, I will try to compare and check condition with in the next few weeks. Still looking?

thanks for the tips libybapa- I still haven't been able to get things lined up afer removing the pulley one more time, it is definatley seated all the way on the shaft and the bolt is tighetening all the way down... I am reluctant to loosen ip bolts because I won't have ip timing dial again for anot...

just a quick update: I did pull the tbelt, and used a puller to pull the ip gear. I had thought that the ip pulley shaft pin might have jammed keeping the pulley from going far enough in. this was not the case... the gear (pulley) is not warped to tweaked (both surfaces flat). I did notice that I ca...

I replaced the IP in my 1.6td engine recently and have had a squeal coming from what I now know is the timing belt in the area of the intermediate shaft pulley. I first removed both accessory belts so these are not to blame. The tensioner (and tbelt) are new, and thanks to a borrowed stethoscope, I ...

sound doesn't change w/ coldstart... sound doesn't go away when warm or any other time pulled waterpump belt and sound persists.... pulley has no wabble. tried using hose as stereoscope w/ no results.. everything was lined up when timing tbelt so i don't suspect this, but still curious what bad valv...