Former VWDieselParts.com Forum

Autozone also has hose that is good for biodiesel. It is fuel injection hose and has a blue
lining inside it. I have been running it for three years now with no problems.

Try unplugging the thermal sensor on the front of the water neck
(drivers side of cylinder head) Blue wire I think. Glow plugs should
come on unless wire is shorted to ground.

FATMOBILE IS A GENIUS


That was what fixed the glow plug issue (ground wires behind the fuse panel)

I have not found that one, Do I have to take the fuse box out to get to it?

I have still got a problem some where, My glow plug light in the cluster flashes with my signal indicator lights. It also flashes one time when I turn on headlights, wipers brake lights or heater fan. I know it is a ground problem and is back feeding. But I have checked and cleaned every ground wire...

I got a new glow relay, Not a Bosch, But German made (Kracker) It is all the local import parts house had and still the same problem. I also ordered a thermal sensor. On my way home after dark last night I noticed when I turned my right signal on that the glow plug light just starts to come on for a...

How is your additional starter/relay wired in? If it's energized from the glow plug relay (no power wiring runs through the glow plug relay except to energize the additional unit), then I'd suspect some of the factory wiring. If you wired the new relay in parallel with the old glow plug relay, you ...

OK ,my glow plugs are pimped using the $10.00 autozone solenoid, Being fed by the original relay. Today they quit working. So I thought my old relay had gone out. I took one from another running car and still no clunk of my ford solenoid. But I can unplug my thermal sensor for the glow plugs and the...

Thank, QuantumTD I 've got the door panel off looking at the bottom I'll have a look at the topside

I love my Rabbit truck in the snow,30 miles to work and never lose traction and I have
several large hills here in east tennessee. (maybe thats why they call us hillbillys)

33 veiws and no answer,I guess I'll take it apart and find out it comes out.

Anybody know how the tensioner for the vent window comes out?
My vent windows will not stay open at 55 mph
The plastic piece that has the screw to adjust the tension has the nut on the bottom
and the screw head on the top. I would like to turn the screw around so I can adjust
it.

Hey guys I am looking for a 1.6TD exhast manifold for a turbo with the
trapazoid shaped inlet flange. The turbo is from a Quantum and going into
a Rabbit truck.

Any body know if 4 door Rabbit front door panels will fit a Rabbit truck?

Does the Golf body have more engine to firewall room than the rabbit or are they about the same?