Search found 175 matches

by Dakotakid
Wed May 01, 2013 8:08 pm
Forum: VW Diesel (General)
Topic: 1.6 NA BLUE smoke out the exhaust
Replies: 14
Views: 5756

Re: 1.6 NA BLUE smoke out the exhaust

Well, no. In around 1.5 million miles of driving these, I have never blown blue smoke. But, I have known guys who are not meticulous in: fitment/installation of rings, honing procedure of guides, installation of valve stem seals. So, perhaps, getting huffy at those attempting to help is not good pro...
by Dakotakid
Tue Apr 30, 2013 11:14 pm
Forum: VW Diesel (General)
Topic: Gear engagement problem, Aut., Golf MK2
Replies: 5
Views: 1969

Re: Gear engagement problem, Aut., Golf MK2

Governor (misspelled?). Added: within the bottom of the trans (in the pan) is a clean-able screen which you can carefully remove and wash in gasoline and replace. Renew the transmission pan gasket. Inspect fluid which comes out. Is it all atf? the problem with these trans is the seal between the atf...
by Dakotakid
Sun Apr 28, 2013 9:39 am
Forum: VW Diesel (General)
Topic: Gear engagement problem, Aut., Golf MK2
Replies: 5
Views: 1969

Re: Gear engagement problem, Aut., Golf MK2

You don't have a problem. This is how they are. If you want immediate engagement, put the damn thing in "D".
by Dakotakid
Thu Mar 07, 2013 11:35 am
Forum: VW Diesel (General)
Topic: Injector Pump: How to know if its time to rebuild
Replies: 17
Views: 5464

Re: Injector Pump: How to know if its time to rebuild

I also think Tyler is correct on that more complicated pre-heater fuel filter. Those are known to draw air if the hardware associated with it is not fresh. Additionally, does this car still have the big plastic water separator located under the passenger rear seat area under the car? They suck air h...
by Dakotakid
Mon Jan 28, 2013 9:36 pm
Forum: VW Diesel (General)
Topic: IP Leak at Banjo Bolt?
Replies: 41
Views: 11234

Re: IP Leak at Banjo Bolt?

Another alternative to the standard copper washers, are the Zexel (Japanese-made Bosch (I believe)) brand rubberized coated washers. I think the local diesel shops carry these. I used these back when I love/hated Mk. I cars. They worked very well for me.
by Dakotakid
Sun Jan 27, 2013 2:47 pm
Forum: VW Diesel (General)
Topic: k-14 or k-24?
Replies: 10
Views: 7592

Re: k-14 or k-24?

From my real-world use of both turbos in stock form: the K-14's benefit is well-gone by 3,000 (or even sooner) rpm. And when it signs off....it is annoyingly GONE. The stock K-24 is just beginning to live at 2,800 or even later. And the wait for THAT boost is damn annoying as well. You honestly have...
by Dakotakid
Tue Jan 08, 2013 2:49 am
Forum: VW Diesel (General)
Topic: 86 Golf Charging Issue
Replies: 14
Views: 3608

Re: 86 Golf Charging Issue

You can buy new brushes many places...hint. You can fairly easily replace the brushes with a soldering iron and some flux/solder. Just make sure you catch the old springs as they are released. Seems as though the springs do not commonly come with the brushes these days. You probably also need to ver...
by Dakotakid
Fri Dec 21, 2012 10:29 pm
Forum: VW Diesel (General)
Topic: Winter Glow Plug Modification?
Replies: 5
Views: 2122

Re: Winter Glow Plug Modification?

Why not just forego the relay and run the glow plugs with a push-button? I've done it a bunch and never regretted it. Just keep it fused.....no problems. I started the practice in late '79.
by Dakotakid
Wed Dec 19, 2012 3:34 pm
Forum: VW Diesel (General)
Topic: Brake or Vacuum issues
Replies: 15
Views: 3785

Re: Brake or Vacuum issues

O-ring located at base.
by Dakotakid
Mon Dec 17, 2012 4:53 pm
Forum: VW Diesel (General)
Topic: '83 Caddy outer CV joint
Replies: 7
Views: 2338

Re: '83 Caddy outer CV joint

It has been a long time since I owned stuff that old. But, as I recall, the earlier style joint also needs to go with the early axle. I am thinking the early joints has smaller diameter shaft size into the center of the joint. In other words, the early joints and axles are specific diameter-wise. I ...
by Dakotakid
Sat Dec 15, 2012 8:36 pm
Forum: VW Diesel (General)
Topic: Vented Rotors
Replies: 5
Views: 2355

Re: Vented Rotors

You need pads for a Rabbit GTI or Golf GTI/Jetta GLI.
Quite frankly, I don't see these ventilated discs as an "upgrade." I've actually removed them from cars due the much shorter life of the pads. Plus, the ventilation really doesn't amount to squat.
by Dakotakid
Sat Dec 15, 2012 8:31 pm
Forum: VW Diesel (General)
Topic: Rubber brake hose lines
Replies: 5
Views: 1901

Re: Rubber brake hose lines

Gently use a propane torch right at the joint. Gently.
Let the heat soak in...maybe several times. Gently attempt to rotate while still good and warm.
Done it many times and never was a problem.
by Dakotakid
Tue Nov 27, 2012 12:39 am
Forum: VW Diesel (General)
Topic: Remanufatured Injection Pump Cold Start
Replies: 11
Views: 2929

Re: Remanufatured Injection Pump Cold Start

The 081C pump was a pump which is commonly found on 1986 models. It is the pump I prefer....not due to the high idle capabilities....but, for the more robust bottom end.

And, yes, you can feel the difference in the two pumps.
by Dakotakid
Tue Nov 20, 2012 11:02 pm
Forum: VW Diesel (General)
Topic: Help - 180 out timing
Replies: 26
Views: 9516

Re: Help - 180 out timing

Cranks rotates twice as often....does THAT help?
by Dakotakid
Fri Oct 26, 2012 2:07 pm
Forum: VW Diesel (General)
Topic: How long does your GP relay post-glow or after-glow?
Replies: 6
Views: 3297

Re: How long does your GP relay post-glow or after-glow?

I think vince Waldonmeister discussed this many years ago.
Try searching through his ramblings.