Former VWDieselParts.com Forum

I've seen worse. Allot worse. As in a chimney on fire. but yes thats blow-by.
Is the car hard to start in the winter?
Could be sticky rings. Has the car been sitting around for any length of time?

I'm guessing at the torque i'm giving her. I just know it's lighter then doing the cam nuts which is 15ft. lbs. The noise i'm hearing is coming from the front.. finally. more noise on the passenger side the the driver but no play... think my tran bearings is going for a shit. might be due for the fa...

I recently replaced my rear wheels bearings after 2 years of service of tightening tightening season after season. (result in cracking chipping). replaced them with NEW OEM bearing, greased and packed the **** out of them. Tighten, rolled, loosened, tighten, rolled, loosened, and tightened back up t...

1.9L TD, 97 Jetta complete head rebuilt last year no leaks nor oil missing/coolent new injector's this year glow plugs changed two years ago. timing on the button compression 390 - 410 PSI no blue, white, black smoke running with the turbo its fine @ higher RPMS but when the turbo's waste gate is op...

i'm more or less talking about, for Volkswagens.

i remember putting some liquid run flat in my tire and it acted like an auto wheel balancing system.. i hear people with 4x4 are putting bb's or airsoft pellets to balance the tire's (Jeep). there also Dynabeads http://www.innovativebalancing.com/index.html Liquid Tire Balancer http://www.deltatires...

the rpms started dropping slowly when this happend? as if the throttle got less and less. i had this happen in montreal. not fun. i was running WVO and i didn't get all the crums out.. [leason learnt] almost as if there still stuff in the tanks.. better get that cleaned out tank/intake screen. eithe...

it could come from the back making the front sound bad.

on mine its high rpm to idle, it bucks (at a certain gear/spot [4th]). but acceleration it doesn't do this, just deaccelerating in gear (4th). (as if one cylinder is still getting fuel) turn the smoke screw down it changed position (lower) i ended up doing a head rebuild not too long ago. may have g...

high rpm to idle rpm in certain gears
it buck then at a certain spot

you should read up on r12 b4 you buy

heres one
http://wiki.answers.com/Q/Where_can_you_get_R12_freon

Ebay...the catch is you have to email the seller certifying you are buying the R12 for your certified auto tech to install!

they don't make r12 anymore since 1992, last time i checked.
they either got 134a or r12a

how did this happen to the pressure plate

theres a bunch of r12a. Red-Tek, Duracool, Freeze 12, Envirosafe and some others. Red-Tek smells pine tree Duracool smells butane/propane basically its 70% propane, 30% butane the molecules are bigger with less chance of it escaping.. less head pressure on the pump. = longer life + less mpg used O-z...

the AAZ's have a rubber hose (clamped on) attached in the middle of the return line. which makes it easy to take the head off to change the head gasket..