Search found 7 matches
- Tue Feb 17, 2015 6:31 pm
- Forum: Vanagon Diesel Forum
- Topic: need a turbo for a 1.9L AAZ from a 1994 Golf
- Replies: 1
- Views: 3455
need a turbo for a 1.9L AAZ from a 1994 Golf
I swapped out a 2.1L waterbox for a 1.9L AAZ TD from a 1994 VW Golf (this engine is really hard to find in the U.S., and many of the big parts stores tell me it doesn’t exist. I bought the engine out of British Columbia). I’ve had some issues over the last 50,000 miles that I’ve worked out (mainly o...
- Mon Apr 30, 2012 12:11 am
- Forum: Biofuels Forum
- Topic: VO filter restriction set-up
- Replies: 6
- Views: 8798
Re: VO filter restriction set-up
Sooo I don't know if you would be happy with an idiot light. That could be run with a wire. aaand they are dirt cheap, adjustable and readily available; in gasser rabbits, in the vacuum line going to the distributor. They can be used to run a light or buzzer,.. use a couple of them at different set...
- Sun Apr 29, 2012 7:03 pm
- Forum: Biofuels Forum
- Topic: VO filter restriction set-up
- Replies: 6
- Views: 8798
VO filter restriction set-up
Is anybody using a restriction gauge on their dash? The only ones I can find under $200 are mechanical gauges, but I would like to install one in my Vanagon conversion and go with electrical with a sending unit. Anybody doing this? In my RV I have a filter restriction gauge, but it is mechanical, so...
- Sat Apr 28, 2012 7:36 pm
- Forum: Biofuels Forum
- Topic: VO system set-up
- Replies: 8
- Views: 7027
Re: VO system set-up
First off, I have a solonoid valve in the hottest and latest possible point in my system - no problems as of yet. (2 years) I don't see a flat plate heat exchanger in your diagrams. There's more than one way to heat vegetable oil, but FPHE's are probably the most tried and true. My system goes FPHE...
- Mon Apr 23, 2012 12:02 pm
- Forum: Biofuels Forum
- Topic: VO system set-up
- Replies: 8
- Views: 7027
Re: VO system set-up
LP-lift pump ,as I read it`s beter to push than pull. do you know http://biodiesel.infopop.cc/eve/forums and http://www.burnveg.com/forum ? Some el.valve are good,some aren`t even same manufactured,too many O ring rubber,temp up to 65c SHOULDN`T be prob but. I also after el.valve go to manuel 3 way...
- Sat Apr 21, 2012 12:13 pm
- Forum: Biofuels Forum
- Topic: VO system set-up
- Replies: 8
- Views: 7027
Re: VO system set-up
I am on wmo but too looong line from solenoid to injectors=too long purge.You can heat ONLY pick up in tank if you need,why dont put IN 3way as close to IP as you can,and no need to heat D, and perhaps use LP only for WVO usualy IP can pull D.How to go 3/8" for every IN line? I'm new to all th...
- Sat Apr 21, 2012 11:41 am
- Forum: Biofuels Forum
- Topic: VO system set-up
- Replies: 8
- Views: 7027
VO system set-up
So I have ran on WVO in my RV for about 4 years now, but have never done an install. I am designing a two-tank system for my 87 Vanagon that I am in the process of switching out the gas to a 1.9td. Have any of you guys doing VO chosen not to heat the VO tank? I was reading a thread on the frybrid fo...