Search found 125 matches
- Mon Feb 20, 2012 2:54 pm
- Forum: VW Diesel (General)
- Topic: internal injection pump pressure
- Replies: 257
- Views: 220899
Re: internal injection pump pressure
Hello to puzzle man,again great info, Because of another fuel than D,do I get better swich/adjust for different fue and I have sometimes different viscosity on as also.Right now I am on 40 psi on idle.Just for record I am NOT looking in hp etc,just for better combustion. ps. I know you use/know Fiat...
- Sun Feb 19, 2012 12:39 pm
- Forum: VW Diesel (General)
- Topic: internal injection pump pressure
- Replies: 257
- Views: 220899
Re: internal injection pump pressure
JUst male/female 12X1.5 neddle valve,what is best that we get by this?
- Sat Feb 18, 2012 1:51 pm
- Forum: VW Diesel (General)
- Topic: not charging, 91 Jetta TD
- Replies: 17
- Views: 4788
Re: not charging, 91 Jetta TD
coke-voltage regulator design -x2,here there is mark usually 14.1 on VR.
But remmember if acu is bad you will get 13.5, and with good acu you will get 14.1 with SAME VR.
But remmember if acu is bad you will get 13.5, and with good acu you will get 14.1 with SAME VR.
- Sat Feb 18, 2012 1:44 pm
- Forum: VW Diesel (General)
- Topic: internal injection pump pressure
- Replies: 257
- Views: 220899
Re: internal injection pump pressure
adjustable pressure regulator like on air compresor,nice thing you say.
Is better place is UNDER outbolt somehow,nidle valve?
Is better place is UNDER outbolt somehow,nidle valve?
- Fri Feb 17, 2012 2:37 pm
- Forum: VW Diesel (General)
- Topic: the final word on the fuel filter pre heater
- Replies: 8
- Views: 2366
Re: the final word on the fuel filter pre heater
This is parhaps like MY BIO aka (wmo).
I use FPHE before filter and loop return which I can on/off,and this is OK for me.Anybody use ILH,i did for short time but I like it.
I use FPHE before filter and loop return which I can on/off,and this is OK for me.Anybody use ILH,i did for short time but I like it.
- Fri Jan 13, 2012 2:06 pm
- Forum: VW Diesel (General)
- Topic: fuel line vacuum guage and clear fuel lines.
- Replies: 32
- Views: 6704
Re: fuel line vacuum guage and clear fuel lines.
Or you can use PA tube for pneumatic tools,same tupe is used for track brake.
About 0.9 e for 8/6mm tube.
About 0.9 e for 8/6mm tube.
- Thu Jan 05, 2012 3:27 pm
- Forum: VW Diesel (General)
- Topic: Low compression on one cylinder - one high too
- Replies: 12
- Views: 3433
Re: Low compression on one cylinder - one high too
I try acetone alone and not so much (on nozzle).I`ll try 50% acetone +50% ATF it`s better than WD,maybe on hot motor it`s good,keep as much as you can and change oil after.
- Fri Dec 30, 2011 1:31 pm
- Forum: VW Diesel (General)
- Topic: new top cover seal seems to big
- Replies: 14
- Views: 4030
Re: new top cover seal seems to big
X2CarlosA wrote:Most people trim those nubs off the seal til it fits.
- Thu Dec 22, 2011 2:11 pm
- Forum: VW Diesel (General)
- Topic: How to clean nozzles?
- Replies: 18
- Views: 5796
Re: How to clean nozzles?
you will never know until they are used in car,just don`t mix them
- Tue Dec 06, 2011 11:13 am
- Forum: VW Diesel (General)
- Topic: Smoky Rabbit
- Replies: 10
- Views: 2109
Re: Smoky Rabbit
Yes some like LM diesel purge,but I believe that one or more nozzle leaks.Filter is good.81VeggieRabbit wrote: Would cleaning the injectors do any good?
- Sun Dec 04, 2011 12:18 pm
- Forum: VW Diesel (General)
- Topic: PO Failures
- Replies: 7
- Views: 1730
Re: PO Failures
Man you froze me with this pictures, thanks for posting.
- Sat Dec 03, 2011 11:57 am
- Forum: VW Diesel (General)
- Topic: Glow Plug Re-Wiring
- Replies: 136
- Views: 900338
Re: Glow Plug Re-Wiring
Keep short wire as you can is good,but also good and clean contacts too.
- Fri Nov 25, 2011 1:28 pm
- Forum: VW Diesel (General)
- Topic: Rough running when engine cold
- Replies: 88
- Views: 288840
Re: Rough running when engine cold
What is internal IP pressure?Hagar pull test?bscutt wrote:The cold start sill makes no discernible difference.
- Tue Nov 22, 2011 2:49 pm
- Forum: VW Diesel (General)
- Topic: source for a single I/P distributor head o-ring?
- Replies: 8
- Views: 1713
Re: source for a single I/P distributor head o-ring?
Or go to hidraulic shop if you in harry.Total is only ~15 .
- Sun Nov 20, 2011 12:01 pm
- Forum: VW Diesel (General)
- Topic: Hard starting tried everything!
- Replies: 79
- Views: 15180
Re: Hard starting tried everything!
Put clear line from injectors to IP(well any line to IP) and see air.CarlosA wrote: However sometimes it does not pull a bubble that is sometimes sitting in the clear line between pump & filter.