Former VWDieselParts.com Forum

well I replaced the whole injector and I do have an after market fuel pump(was done before I bought it) and if I leave it on the new injector leak like the old ones. Could the return line be clogged? or did I get bad injectors?

another simple test I was told to do, was to get the engine up to temp and take the oil fill cap off, if it spews oil then your rings are bad/worn. It is a cheaper test than the smoke machine and one you can do yourself. Cause if your rings are bad they pressurize the crankcase and thus spewing oil.

where is a good place to find window seals (all of them) and door seals (I guess they are called rain rails that run the top of the golf)?

I guess quite isn't all that important, but 90% of my driving is on highway at 65 -70 mph, but then again I am used to driving that with a 4x4 and mud tires.

cool thanks, seems that is my issue

I tested the injectors (loosen the fuel line to see if RPM dropped... it did on all of them). They are new nozzles so they should work good. The problems I am running into are that the injectors are leaking where they break apart (lower and upper treads). is there a gasket for this or do I just need...

I have gotten more into the car and as soon as something gets fixed I find another thing that is broken. I just installed a new radiator and have now found what seems to be a heater core leak. I found where there was trouble with the heater core and that they were recalled in 92, will the stealershi...

I have some of my pics, can post more later but here they are, instead of different color wire I did different shrink wrap. the rest is pretty much what is listed above. http://www.imagecoast.com/images/robmee/0622081321.jpg http://www.imagecoast.com/images/robmee/0622081321a.jpg http://www.imagecoa...

it is non turbo

I decided today that my golf wasn't a quick fix but more of a project car and it is time to treat it like one. That being said, what optionon are there out there for exhaust? I don't want glass pack type, just quiet (impossible for diesel but hey) and inexpensive (the wife is keeping tabs).

Does anyone have a pic of an 85 fuse block (under the steering wheel) that they could post. I have the book, but it is easier to see a pic of it.

Thanks

How do you get the ignition lock out ? I am re keying the car and have a new ing lock, the old one has the tumbers removed (this is how I got it) need to get the housing out.

Thanks

I pimped my glow plugs so do I need this?

I noticed that this flat fuse( if this is what it is called) was kinda burned thru and needs to be replaced, but I am not sure what it is as far as an amp number (ie 20 25 50...etc). It looks like this : http://www.imagecoast.com/images/robmee/0701081328a.jpg and it goes here http://www.imagecoast.c...

should I get the normal 140 pop nozzles or should I get the 155 Mercedes nozzles? I will be running B100 in the very near future. Also if I did go with the 155 is there anything I would need to do with the pump to get it to produce the higher pressure?