Former VWDieselParts.com Forum

Can I use rubber fuel line to Tee into the boost controller?

I have a boost controller but I never put it on. I would also like to know how to set it up. The k 14 will only boost up to about 15 anyway right.

There is no BOV valve, it is an eco diesel intake. What will too much boost do?

On the side of the turbo there is a hollow bolt and metal line that goes to the waste gate. If I take that out and replace it with a solid bolt I will have full boost all the time . Will that cause any problems?

I snapped one of my new rings on install. I am looking for one ring it's the second one down on the piston. Std size.
Thanks

What they are talking about is, if you feel air coming out of the oil cap hole it has blow by. Turn the cap to the off position, if it dances around or blows off you have bad rings.

Now I see I am blond you know.

Yup like blinker fluid lol

710 cap?

Is there a way to tell if the oil I am burning is coming from bad rings or the turbo?

Should this be made a sticky good info here.

If anyone thinks my valve renew is bad let me know, It would be good to hear the good as well as the bad. It's ok I can take it.

Thanks for the pic info I will try that next time. I know my pic is way to big. I looked at the back side og my lathe and it says Montgomery Wards, I think the lathe is from the 50s I got it from my wifes grandpa.

Not sure what kind of lathe I have, it has no tag or info on it. The last time I used tinypic.com for pics they went away after about one day. I did edit them at that time and made them smaller. When ever I leave them big they stay on the post. Not sure whats up with that.