steering column diagram needed

porkyluck · Post by **porkyluck** » Fri May 18, 2007 10:23 am

need to replace the bushings/bearings.........thanks

tylernt · Post by **tylernt** » Fri May 18, 2007 7:07 pm

This is for Mk1... through '84.

porkyluck · Post by **porkyluck** » Fri May 18, 2007 7:29 pm

thanks.....is the column bearing the one that usually goes on the mk1 and held up with a zip tie, etc?

tylernt · Post by **tylernt** » Fri May 18, 2007 7:38 pm

Yep, exactly. Installation of the new one requires it to be pressed into place, which means removal of the tube, which is apparently a pain (I'm just waiting for my bearing to fall out... fingers crossed...).

porkyluck · Post by **porkyluck** » Sat May 19, 2007 6:20 am

thanks again tyler!

Caddyman · Post by **Caddyman** » Sun May 20, 2007 10:32 pm

tylernt wrote:

This is for Mk1... through '84.

Not to hijack this thread but, what's the p/n and dimensions on the steering column roller bearing? Thanks.