Parts for Sale
Moderator: Fatmobile
-
- Glow Plug
- Posts: 12
- Joined: Fri Feb 02, 2007 2:58 pm
- Location: Potsdam, NY
Parts for Sale
I have a VW mechanic friend who is closing his shop after about 40 years. He has boxes of assorted parts that he'd like to sell, all kinds of things: brake parts, engine parts, computers, even a transmission or two. Since he doens't use the internet, I offered to post a note on the net and see what happens. He has way too much stuff to list everything, so if you have a specific hard to find part that you need, just me know and I'll ask him if he's got it.
Thanks,
Bill
Thanks,
Bill
1990 Jetta 1.6 240,000 mi.
Parts Needed
Cornjuggler, I need a clutch & pressure plate, and head gasket for 1981 VW Rabbit Diesel Pick up. Can u check with friend who is selling out and get back to me? Thanks.
Sent PM with my phone number
Looking for a set of front axles for rabbit 80-64.
Nothing makes a failure but a try!
1982 1.6L NA pickup in process of being reborn.
1982 1.6L NA pickup in process of being reborn.
Assorted Parts...
Cornjuggler,
Looking for a FUEL PUMP for a 1981 Diesel Pickup...
Thanks,
Tom
Looking for a FUEL PUMP for a 1981 Diesel Pickup...
Thanks,
Tom
Tom
'81 VW Deisel Truck
'81 VW Deisel Truck
-
- Glow Plug
- Posts: 24
- Joined: Wed Apr 19, 2006 11:08 am
- Location: Columbus, Ohio
- Contact:
-
- Diesel Freak
- Posts: 164
- Joined: Tue Sep 04, 2007 5:25 pm
i need both strut assemblies w/ the strut mounts minus the springs and don't really need the inserts bc i want new OEM height and will use my springs. can you help? i have an 82 4 door rabbit
82 Rabbit Diesel, 2" lift, "45 mpg average"Carlos Galvos wrote: The steering wheel(81VWRabbit L) is pleasant to grip, and the instrumentation is cleanly and logically laid out in a manner one would expect from a fine European car.(posted on EBAY)
1.6 mechanical head
I need a GOOD 1.6 mechanical head. The one i have has several cracks between the valves.
I know some will say that cracks between the valves don't hurt anything, but...the crack in #3 cyl on this head DOES pressurize the cooling system, and there is LOTS of whiteish residue present in that cyl, from coolant being sucked in. Rant off!
Anyhow..from your friend, or any other users here...I need a good head.
I know some will say that cracks between the valves don't hurt anything, but...the crack in #3 cyl on this head DOES pressurize the cooling system, and there is LOTS of whiteish residue present in that cyl, from coolant being sucked in. Rant off!
Anyhow..from your friend, or any other users here...I need a good head.
Always 3-5 A1's on hand!
'84 TDI-M GTI w/ALH and VNT,in the works!
'84 TDI-M GTI w/ALH and VNT,in the works!
OLD POST
HEY...I just noticed that this thread was started back in FEBRUARY, and has been resurected by another user.
Oh well..I still need a head.
Oh well..I still need a head.
Always 3-5 A1's on hand!
'84 TDI-M GTI w/ALH and VNT,in the works!
'84 TDI-M GTI w/ALH and VNT,in the works!
-
- Global Moderator
- Posts: 7566
- Joined: Wed Oct 30, 2002 10:28 pm
- Location: north central Iowa
Since this thread isn't getting a response from the original poster; I'd suggest checking with kurt333 over on the vortex for the strut housings.
... and caddywompus has been getting ahold of me about heads he has.
He has a shop cleaning post down a little ways.
1.6D-nut, What size headbolts fit the head you want?
... and caddywompus has been getting ahold of me about heads he has.
He has a shop cleaning post down a little ways.
1.6D-nut, What size headbolts fit the head you want?
'91 Golf gasser converted to a 12mm pump, M-TDI.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.