![Image](http://www.epsilon-gamma.org/rabbit/hih_he.jpg)
I started collecting my veg a few weeks back:
![Image](http://www.epsilon-gamma.org/rabbit/collection.jpg)
After settling for two weeks, I ladled the oil into a 5gal with a 100 micron filter bag in it. Then use gravity to drain that bucket through a 10 and 5 micron sock filter in filter to a bottom bucket.
![Image](http://www.epsilon-gamma.org/rabbit/filtering.jpg)
From the 10 and 5 filter bucket I drain to my storage barrel.
![Image](http://www.epsilon-gamma.org/rabbit/storage.jpg)
So far the oil looks very clean
![Image](http://www.epsilon-gamma.org/rabbit/clean.jpg)
Once I get everything plumbed up I will add two more switches to my control panel for the feed and return lines.
![Image](http://www.epsilon-gamma.org/rabbit/controls.jpg)
The gauge is a vdo 100 to 250 deg f gauge with sending unit. I'll have a selector switch to go between engine temp and veg feed temp. I checked the other hash marks on the gauge today with a thermocouple. The first hash past 100 was 125 and the second was 150. It's kind of a strange gauge.
![Image](http://www.nhspeedometer.com/images/VDO/310239.gif)
I'll post more once I get further. Thanks, Rob.