HP/KW required to turn the pump

This forum is for TDI (Turbo Direct Injection) questions/posts. Non-TDI Motors (Including the 1.6, and 1.9 or other variant turbo diesel motors) should go in the VW Diesel General Forum

Moderator: Fatmobile

Post Reply
dalek
Glow Plug
Posts: 6
Joined: Sun Jul 12, 2009 8:41 am
Contact:

HP/KW required to turn the pump

Post by dalek »

How much power is it required to turn a TDI fuel pump? I want to build a jig so I can play with the pump on a bench and need to figure out what kinda power I need to make it happy.
Josh8Loop
Glow Plug
Posts: 19
Joined: Mon Aug 24, 2009 5:59 pm
Location: Port St Lucie, Florida

Post by Josh8Loop »

I am no expert by any means, but I wouldn't think it would take more than 1/3 to 1/2 HP max. It sounds as though you may need to experiment a bit to find out. I have read on the net about guys turning them with drills, which would be far less than 1/2 HP if that is the case. In any event, good luck! Let us know how it goes.
2002 VW Jetta TDI, Evry Mod, Line pressure Mod, DRL mod.
Post Reply