1.6 TD SWAP HELP
Moderator: Fatmobile
-
- Glow Plug
- Posts: 1
- Joined: Fri Nov 04, 2011 11:31 am
1.6 TD SWAP HELP
I JUST FINISHED BOLTING MY MK2 TD SWAP ON MY CADDY, BUT STILL NEED SOME HELP WITH LITTLE THINGS LIKE RELOCATING THE FUEL FILTER & THE EXHAUST, I NEED SOME ADVISE. THANKS FOR LOOKING
Re: 1.6 TD SWAP HELP
Taken from http://tomsebooks.com/newpoweroldcaddy.htm
A great read with lots of pictures....
"The fuel filter requires relocating also. It will reside on the forward side of the same strut tower in a position similar to that of the Jetta."
"The NA exhaust down pipe will not work because the Turbo outlet is centered more in the car that the original one. The fix I used was to cut the pipe at the flange, weld in a 4 ½ in straight piece and then the original elbow. Works don’t it?"
Don't know if any of this helps you, but it is a MK2 TD swap into a Caddy, so I assume what he did will work for you also.
A great read with lots of pictures....
"The fuel filter requires relocating also. It will reside on the forward side of the same strut tower in a position similar to that of the Jetta."
"The NA exhaust down pipe will not work because the Turbo outlet is centered more in the car that the original one. The fix I used was to cut the pipe at the flange, weld in a 4 ½ in straight piece and then the original elbow. Works don’t it?"
Don't know if any of this helps you, but it is a MK2 TD swap into a Caddy, so I assume what he did will work for you also.