1978 4 Door Rabbit

This is a place for us to share progress on and upgrades to our vw diesels.

Moderator: Fatmobile

Post Reply
CarlosA
Turbo Charger
Posts: 302
Joined: Tue Nov 08, 2011 12:04 am
Location: Grants Pass, OR
Contact:

1978 4 Door Rabbit

Post by CarlosA »

I intend to post more photos of my daily driver in this thread eventually, but for now i`ll just show the beginnings from purchase to new paint.

All of this took place in summer 2011.

As it sat at 30 year owners house:
Image

First day:
Image

Image

OD rolled over a few times putting it at 314k
Image

Immediately tore into the engine and found this bent rod:
Image

I put it back together for a while and decided to paint the car on the cheap.

Here is the solder job I did to fill trim holes - used ordinary solder with acid flux & a plumbers style torch:
Image

Image

Image

Stripped for paint:
Image

A miracle there is no rust through anywhere on the body
Image

Image

Still looking for a couple of these wheels:
Image

The only real dent on the body:
Image
CarlosA
Turbo Charger
Posts: 302
Joined: Tue Nov 08, 2011 12:04 am
Location: Grants Pass, OR
Contact:

Prep for paint...

Post by CarlosA »

Rub it down really good with ajax and scotch brite pads:
Image

Image

Removes a lot of the flaky paint
Image

Image

Image

Image

Capped the old antenna hole
Image

Block sanding this whole car is never going to work
Image

Spent half the cost of the car on this sander/buffer and made short work of it
Image

Much better
Image

Image

Sanding done
Image

Image

Image

Baking soda scrub down to be sure I got all the flux off the metal
Image

Basic masking ... paint doesnt stick to glass, and its really not a big deal
Image
CarlosA
Turbo Charger
Posts: 302
Joined: Tue Nov 08, 2011 12:04 am
Location: Grants Pass, OR
Contact:

And now the rolling/brushing begins

Post by CarlosA »

Setup for the tight areas
Image

Excellent coverage with just one coat
Image

Image

Image

Rolling using foam rollers
Image

End of first coat:

Image

Second coat:
Image

And I don`t have pics of subsequent coats but here are some finished pics:

Image

Image

First time I ever drove the car, brought my bike just in case something went wrong:

Image

This is the car 7 months later with snow tires and my bike on top:

Image
bscutt
Turbo Charger
Posts: 1720
Joined: Mon Mar 10, 2003 4:49 pm
Location: Springfield, VA

Re: 1978 4 Door Rabbit

Post by bscutt »

pretty impressive. I want to repaint my 82 but don't have a good place to use my sprayer. I don't think the rollers would do a great job on red though. The silver looks pretty good. Of course the prep work is the hardest part.
Bob

'06 Jetta TDI
'82 Rabbit 1.6NA
Honda, 99 GMC Suburban, '41 Chevy Coupe
CarlosA
Turbo Charger
Posts: 302
Joined: Tue Nov 08, 2011 12:04 am
Location: Grants Pass, OR
Contact:

Re: 1978 4 Door Rabbit

Post by CarlosA »

Yes, on the white rabbit i`m going to use glossy rustoleum. It will buff out to a mirror shine! You just want to go thick, many coats - maybe 8 or 10 coats. And do a lot more sanding in between coats to get it really smooth, then wet sand the final coat and work it down with the buffer.

I thinned the paint nearly 50% with acetone so that it would lay down super flat.

I actually may take this rabbit back to the original turd brown color in a high gloss, I found it fairly difficult to prep the door jambs and stuff, so skipped them entirely - if doing any part of the interior its going to triple the time spent.

This is the site I originally referenced when researching this several years ago. Check out the gloss he achieved:

http://www.rickwrench.com/index79master ... paint.html
bscutt
Turbo Charger
Posts: 1720
Joined: Mon Mar 10, 2003 4:49 pm
Location: Springfield, VA

Re: 1978 4 Door Rabbit

Post by bscutt »

Yes I've seen that site. I did paint my 1951 Chevy pickup in the driveway in about 1989 using gloss red rustoleum thinned with mineral spirits. It came out nice and glossy but I didn't get enough coats on it but I ended up selling it to a guy who took it to Germany. I stripped that truck to bare steel then primed and painted it. That was a job!
Bob

'06 Jetta TDI
'82 Rabbit 1.6NA
Honda, 99 GMC Suburban, '41 Chevy Coupe
CarlosA
Turbo Charger
Posts: 302
Joined: Tue Nov 08, 2011 12:04 am
Location: Grants Pass, OR
Contact:

Re: 1978 4 Door Rabbit

Post by CarlosA »

Awesome, and yeah the stripping was really the most difficult. I`d have bead or soda blasted it if I lived in the country still, that would have been an excellent base for the roller job.
Nevadan
Cetane Booster
Posts: 87
Joined: Wed Dec 22, 2010 1:41 pm
Location: Reno, Nevada

Re: 1978 4 Door Rabbit

Post by Nevadan »

That's a great idea! No overspray! No excessive masking! Obviously lots of prep work and sanding, but that has to be done anyway. The link to the other site shows that it can be finished off nicely also.
1985 Jetta 1.6 TD
1981 Caddy (getting a 1.6TD)
1987 Quantum Syncro Wagon, converted to 2.0 TD August 2020
1986 Passat TDI
2006 Touareg V10 TDI
1996 CHevy 6.5 TD
CarlosA
Turbo Charger
Posts: 302
Joined: Tue Nov 08, 2011 12:04 am
Location: Grants Pass, OR
Contact:

Re: 1978 4 Door Rabbit

Post by CarlosA »

I agree, really cuts a lot of that out and seems like it will last forever. I will post up progress of a glossy job next time.
VanBoy
Cetane Booster
Posts: 82
Joined: Thu Apr 01, 2010 12:38 am
Location: Pacific Northwest, USA

Re: 1978 4 Door Rabbit

Post by VanBoy »

Nice....hope my 78 Rabbit looks that good when I'm done....
1999 E350 ClubWagon 7.3L Power Stroke
1990 E350 ClubWagon 7.3L IDI x2
1977 Kenworth K100 Cummins NTC-350
1977 IH Transtar II Cummins NTC-290
1977 IH Transtar II Cummins Formula 290 (ongoing project)
1978 VW Rabbit 1.5L (ongoing project)
And a few other gas rigs....
Post Reply