I just acquired a 1978 Rabbit diesel.
The engine was running until they threw a timing belt. After various things they ended up breaking a cam bearing cap when trying to put the camshaft back in after removing it for some reason. My question is can a replacement cap be bought and installed or will it require removing the head and having it line bored? I'm completely new to vw diesels so learning as I go but have worked on cars as a hobby for many, many years.
1978 Rabbit Diesel
Moderator: Fatmobile
-
- Global Moderator
- Posts: 7574
- Joined: Wed Oct 30, 2002 10:28 pm
- Location: north central Iowa
Re: 1978 Rabbit Diesel
Since this is an old 1.5 I would go the cheap route.
You could probably get a used cap and work on it until it fit right.
I shouldn't say "you" can because I have no idea what your skill level is but with time and patience it could be done.
You could probably get a used cap and work on it until it fit right.
I shouldn't say "you" can because I have no idea what your skill level is but with time and patience it could be done.
'91 Golf gasser converted to a 12mm pump, M-TDI.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
Re: 1978 Rabbit Diesel
Welcome to the forum.
I'm surprised how many 1978, 1979 VW Rabbits are showing up.... I too came here inquiring on a "new" 1978 VW diesel Rabbit that "followed" me home a few years back. Good luck w/ your Rabbit! (Is it still the original 1.5L or has someone upgraded it to a newer 1.6L?)
I'm surprised how many 1978, 1979 VW Rabbits are showing up.... I too came here inquiring on a "new" 1978 VW diesel Rabbit that "followed" me home a few years back. Good luck w/ your Rabbit! (Is it still the original 1.5L or has someone upgraded it to a newer 1.6L?)
1999 E350 ClubWagon 7.3L Power Stroke
1990 E350 ClubWagon 7.3L IDI x2
1977 Kenworth K100 Cummins NTC-350
1977 IH Transtar II Cummins NTC-290
1977 IH Transtar II Cummins Formula 290 (ongoing project)
1978 VW Rabbit 1.5L (ongoing project)
And a few other gas rigs....
1990 E350 ClubWagon 7.3L IDI x2
1977 Kenworth K100 Cummins NTC-350
1977 IH Transtar II Cummins NTC-290
1977 IH Transtar II Cummins Formula 290 (ongoing project)
1978 VW Rabbit 1.5L (ongoing project)
And a few other gas rigs....
Re: 1978 Rabbit Diesel
All original even to the original owners manual still in the glove box.
I'm fairly handy with tools and such, my problem it seems is finding a cap. Anyone have one laying around? Happy to pay whatever it's worth within reason. Got paypal even though I hate their no gun policies so can easily get you paid.
Next best option it seems is just replacing the head but hate to do that since it seems it only have around 160k miles and appears to be in decent shape except for stupidity with the cap. LOL
I'm fairly handy with tools and such, my problem it seems is finding a cap. Anyone have one laying around? Happy to pay whatever it's worth within reason. Got paypal even though I hate their no gun policies so can easily get you paid.
Next best option it seems is just replacing the head but hate to do that since it seems it only have around 160k miles and appears to be in decent shape except for stupidity with the cap. LOL
-
- Global Moderator
- Posts: 7574
- Joined: Wed Oct 30, 2002 10:28 pm
- Location: north central Iowa
Re: 1978 Rabbit Diesel
I just took a bunch of junk heads apart and saved a bucket of cam caps.
$5 each
plus $6 shipping with delivery confirmation.
Sharkey once claimed to line bore a block with the cam and thin sandpaper.
It was an emergency situation after an overheat and got him home and a bit beyond if I remember right.
1-2 thou clearance is hard to do with sandpaper.
$5 each
plus $6 shipping with delivery confirmation.
Sharkey once claimed to line bore a block with the cam and thin sandpaper.
It was an emergency situation after an overheat and got him home and a bit beyond if I remember right.
1-2 thou clearance is hard to do with sandpaper.
'91 Golf gasser converted to a 12mm pump, M-TDI.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
Re: 1978 Rabbit Diesel
Wow....all original AND with the original owners manual.
I had a hard time finding a 1.5L head, back in the day (few years back). My original had a crack.... nothing local, had to get it online. I wonder where I put the old head.....
I had a hard time finding a 1.5L head, back in the day (few years back). My original had a crack.... nothing local, had to get it online. I wonder where I put the old head.....
1999 E350 ClubWagon 7.3L Power Stroke
1990 E350 ClubWagon 7.3L IDI x2
1977 Kenworth K100 Cummins NTC-350
1977 IH Transtar II Cummins NTC-290
1977 IH Transtar II Cummins Formula 290 (ongoing project)
1978 VW Rabbit 1.5L (ongoing project)
And a few other gas rigs....
1990 E350 ClubWagon 7.3L IDI x2
1977 Kenworth K100 Cummins NTC-350
1977 IH Transtar II Cummins NTC-290
1977 IH Transtar II Cummins Formula 290 (ongoing project)
1978 VW Rabbit 1.5L (ongoing project)
And a few other gas rigs....
Re: 1978 Rabbit Diesel
On a different subject, assuming I can get this cap to work and we all know what ASSuming gets you. LOL
What's a good source for body rubber or is it available. Windows, doors, the works. Got some in pretty bad shape as most old cars are.
What's a good source for body rubber or is it available. Windows, doors, the works. Got some in pretty bad shape as most old cars are.
Re: 1978 Rabbit Diesel
Did ya get a part yet to fix it?
1999 E350 ClubWagon 7.3L Power Stroke
1990 E350 ClubWagon 7.3L IDI x2
1977 Kenworth K100 Cummins NTC-350
1977 IH Transtar II Cummins NTC-290
1977 IH Transtar II Cummins Formula 290 (ongoing project)
1978 VW Rabbit 1.5L (ongoing project)
And a few other gas rigs....
1990 E350 ClubWagon 7.3L IDI x2
1977 Kenworth K100 Cummins NTC-350
1977 IH Transtar II Cummins NTC-290
1977 IH Transtar II Cummins Formula 290 (ongoing project)
1978 VW Rabbit 1.5L (ongoing project)
And a few other gas rigs....
-
- Global Moderator
- Posts: 7574
- Joined: Wed Oct 30, 2002 10:28 pm
- Location: north central Iowa
Re: 1978 Rabbit Diesel
Yeah, I sent him a couple #4 caps.
'91 Golf gasser converted to a 12mm pump, M-TDI.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
Re: 1978 Rabbit Diesel
Fatmobile wrote:Yeah, I sent him a couple #4 caps.
Hopefully another diesel saved to rumble on another day.....
1999 E350 ClubWagon 7.3L Power Stroke
1990 E350 ClubWagon 7.3L IDI x2
1977 Kenworth K100 Cummins NTC-350
1977 IH Transtar II Cummins NTC-290
1977 IH Transtar II Cummins Formula 290 (ongoing project)
1978 VW Rabbit 1.5L (ongoing project)
And a few other gas rigs....
1990 E350 ClubWagon 7.3L IDI x2
1977 Kenworth K100 Cummins NTC-350
1977 IH Transtar II Cummins NTC-290
1977 IH Transtar II Cummins Formula 290 (ongoing project)
1978 VW Rabbit 1.5L (ongoing project)
And a few other gas rigs....