Page 1 of 1
Passenger Performance 1.6td intake manifold
Posted: Wed Jun 30, 2010 5:02 pm
by punkvideo81
I wanted to throw one of these on my 1.6td but just got an email back from them that they don't make them anymore. Does anyone else make them? Thanks
Posted: Thu Jul 01, 2010 12:20 am
by Fatmobile
The stock TD intake really favors the center 2 cylinders.
I don't know of anyone who is making them with a better plenum.
My suggestion, since you have a MK1 is get a VNT turbo from a TDI.
That will allow you to use a cheap gasser intake with much better flow.
With the stock turbo sticking up so high, it's hard to make a good intake that will fit between the turbo and head.
Most of the TDI turbos hang down.
I don't think they will fit a MK2 because of the motor mount,
maybe not even the MK3s.
,... but they fit the Rabbits just fine.
You can probably get a VNT turbo for less than the passenger performance intake would cost,.. sell the rest of your stock turbo parts, come out ahead
and have a better turbo.
Otherwise about any welding shop could make you one,.. with a picture of what passenger performance was doing.
Posted: Wed Aug 25, 2010 12:10 pm
by punkvideo81
Thanks for the advice, you have pm