Former VWDieselParts.com Forum

ani one here as some mecanical sysem o conrol vnt turbo ?

I posted one in my vnt build,.. in the performance fora.

There are a bunch of vane control threads in the FAQ here:

http://www.vwdiesel.net/forum/index.php?topic=16687.0

thanks friend


that stuff give me light .

there are some members here that ive some kind of mecanic controler for vnt ?

its good to ive some one to ask , dumm questions

in that forums , some are down , other i cant post , becouse i cant reg , for some reason i cant understend

They had problems with hackers so I don't think they allow new members to register.

i see

your mecanism for controling vanes , are running good ?

by the way

can i post work in progress of my car project in projects section ?

it isnt a vw but most mecanic parts and engine are

its a seat

ive change him alot

mustly in body work

Yeah, the project section doesn't get used much,
it's fine to post projects other than VW diesels that you are working on.
I'll probably post some of my cobb cook stove and work with local clay/sand/straw this summer.

My VNT controller started sticking so I took it apart to improve it,.. and made it wose in many ways, ha.
I plan to do the same thing with different forces on the arm ( pulling away from the vane controller, instead of jamming toward it) as it moves.
The vane controller is on an arc that swings away from the turbo then back to it,.. my controller held it tightly against the turbo and it had a hard time getting over the hump.
Next one will pull away as it moves.

I also want to have a lever on the dash so I can adjust it from inside the car, for power or economy, loud and bassy or quiet and whiney at idle.

thanks

lets see what hapen when i finish body work , and start hp demand

did you know 1yengine good ?

I'm not familiar with the 1Y at all.

ok

thanks