Governor Shaft Adjustments
Posted: Tue Nov 08, 2011 1:23 am
I`m new here, been reading many many threads since June when I got my experimental Rabbit. I`ve had a blast tinkering with it off and on and trying to get it to start as good as this. (not mine!)
So I tore down my pump just to see what its condition was like, its incredibly clean and probably recently rebuilt.
I am wondering if anyone has adjusted the governor shaft, as pictured below. And mostly wondering what sort of adjustments can be done there, if they are worth it, what the factory specs are, and so forth. I have read everything I can find on the Bosch VE pump so far.
btw, my pump number is: 068 130 108K for those interested in numbers. I am looking for a 107A, and have another core on its way here to play with.
Soon i`ll setup my pump for pressure check and other things i`ve found on this forum.
So I tore down my pump just to see what its condition was like, its incredibly clean and probably recently rebuilt.
I am wondering if anyone has adjusted the governor shaft, as pictured below. And mostly wondering what sort of adjustments can be done there, if they are worth it, what the factory specs are, and so forth. I have read everything I can find on the Bosch VE pump so far.
btw, my pump number is: 068 130 108K for those interested in numbers. I am looking for a 107A, and have another core on its way here to play with.
Soon i`ll setup my pump for pressure check and other things i`ve found on this forum.