Injector shims, again?
Posted: Sun Dec 18, 2011 8:45 pm
anyone have a source for injector shims other than Mercedessource.com? all the injectors i have seem to have the 0.050" shim, except for the 2 150bar ones that have 0.054"
i guess i don't need a whole set... just 0.051-0.055 range.
had an injector on #2 that has been nailing bad and doesn't respond to cleaning so i put in a new nozzle and upped the pressure to 2200psi (makes timing a bit later) to shut that cylinder up. i'm on the verge of being over advanced but wanted to see what changing the pressure/timing on the offending cylinder would do.
-dan
i guess i don't need a whole set... just 0.051-0.055 range.
had an injector on #2 that has been nailing bad and doesn't respond to cleaning so i put in a new nozzle and upped the pressure to 2200psi (makes timing a bit later) to shut that cylinder up. i'm on the verge of being over advanced but wanted to see what changing the pressure/timing on the offending cylinder would do.
-dan