Page 1 of 1

Upgrade the Caddy

Posted: Thu Feb 16, 2012 11:58 am
by dubdoc
Howdy all. Just thought I'd share a few pics of the latest upgerades to the Caddy. Stripped her bare, repaired a few small issues and a nice base/clear paint job.

Image
Image
Image
Image
Image
Image

Previous 1.6 TD
Image

Present AAZ Torquemonster 147 horsepower and 255 ft lbs
Image
Image

Re: Upgrade the Caddy

Posted: Thu Feb 16, 2012 1:01 pm
by Fatmobile
Welll done.
I'm sure this is many peoples dream build.

Re: Upgrade the Caddy

Posted: Thu Feb 16, 2012 2:17 pm
by dubdoc
I don't know about that, but it's certainly my dream build. :)

Re: Upgrade the Caddy

Posted: Thu Feb 16, 2012 4:30 pm
by bscutt
I'm jealous... :)

It's gorgeous!

Re: Upgrade the Caddy

Posted: Thu Feb 16, 2012 8:59 pm
by surfcam
This is a very very sweet ride. With my orange peel, drippy painting applies I would be scared to drive it very far. What is added to the AZZ to bring up the hp and torque.

Re: Upgrade the Caddy

Posted: Fri Feb 17, 2012 12:32 pm
by dubdoc
surfcam wrote:This is a very very sweet ride. With my orange peel, drippy painting applies I would be scared to drive it very far. What is added to the AZZ to bring up the hp and torque.

We all had to start somewhere. I started with a truck that "looked" good, but was far from it.
The AAZ has been bored out, balanced, ARP studs and bolts everywhere. The head is ported as are the manifolds. The Turbo is a much larger Garrett T3 and the pump was massaged by Giles at Performance Diesel Injection. It has a 2.5" downpipe and exhaust through a large Magnaflow muffler.

Re: Upgrade the Caddy

Posted: Sat Feb 18, 2012 11:50 am
by Diesel Dean
Sweet truck I love the Caddy. I think if a small diesel truck was made today it would sell great.

Re: Upgrade the Caddy

Posted: Sat Feb 18, 2012 12:06 pm
by bscutt
They (VW) do make one in Europe but apparently we aren't good enough to get them. :-(

Re: Upgrade the Caddy

Posted: Tue Apr 01, 2014 5:13 pm
by dubdoc
Well, I'm getting close to finishing the engine compartment (rewired everything, relays for the new e-code headlights, etc., etc., etc.). The rad pusher fan was the last item.

Image

Now I've just got to figure out what to do to cover the top of the ugly rad.

Image