The keyway on the TDIs is a flat spot on one side.
It's D shaped,.. the part number actually ends in D.
The keyway on the AAZ is the same as the older Rabbits, that little angled notch on the end of the crank.
Crank bolt gets loose, some say because the sepentine belt grabs the crank and the alternator puts a backspin on it when slowing down.
Alternator actually drives the crank.
The V belts don't seem to grab the crank and run it but I have seen several 1.6s, with the same style keyway, give up
and the timing gear let loose of the crank.
97 1.9?
-
- Global Moderator
- Posts: 7574
- Joined: Wed Oct 30, 2002 10:28 pm
- Location: north central Iowa
Re: 97 1.9?
'91 Golf gasser converted to a 12mm pump, M-TDI.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
-
- Turbo Charger
- Posts: 1482
- Joined: Tue Sep 28, 2004 8:43 pm
- Location: Canada Southern Alberta
- Contact:
Re: 97 1.9?
All the TDI's have the deeper keyway. Right from 96. 2000 is a different block but also has the deep keyway. The Passat was the first TDI in North America in 96. I've never seen one in Canada.
99 TDI Jetta (Z1 engine code)
94 Grand Caravan
89 Dodge Gold Stream B class
http://www.antiquedollhouseofpatterns.ca/
94 Grand Caravan
89 Dodge Gold Stream B class
http://www.antiquedollhouseofpatterns.ca/
Re: 97 1.9?
Well my 92 Eco had that issue as well as spitting the Dampner pully off the crank!
So the difference between the 1.6/1.9 timing gear? But the TDI is better?
So the difference between the 1.6/1.9 timing gear? But the TDI is better?
-
- Turbo Charger
- Posts: 1482
- Joined: Tue Sep 28, 2004 8:43 pm
- Location: Canada Southern Alberta
- Contact:
Re: 97 1.9?
I really haven't heard too many problems with the 1.6 key but the AZZ does have a bit of a design flaw. I'm thinking that it just takes a little more hp to drive the high capacity pump. There could be other factors as well. The AZZ is really like the 1.6 with longer throws on the crank. So I'm think that it makes torque at lower rpm which probably adds to the load on the key as well.
99 TDI Jetta (Z1 engine code)
94 Grand Caravan
89 Dodge Gold Stream B class
http://www.antiquedollhouseofpatterns.ca/
94 Grand Caravan
89 Dodge Gold Stream B class
http://www.antiquedollhouseofpatterns.ca/
Re: 97 1.9?
Ok but to put the tdi timing gear on its just a matter of grinding out the keyway on the crank?
-
- Turbo Charger
- Posts: 1482
- Joined: Tue Sep 28, 2004 8:43 pm
- Location: Canada Southern Alberta
- Contact:
Re: 97 1.9?
I think it has to be professionally milled. There's people out there that will come to your house or take it to a shop. Unless you have a very very steady hand.
99 TDI Jetta (Z1 engine code)
94 Grand Caravan
89 Dodge Gold Stream B class
http://www.antiquedollhouseofpatterns.ca/
94 Grand Caravan
89 Dodge Gold Stream B class
http://www.antiquedollhouseofpatterns.ca/
-
- Global Moderator
- Posts: 7574
- Joined: Wed Oct 30, 2002 10:28 pm
- Location: north central Iowa
Re: 97 1.9?
Grinding a flat spot near the end; can/has been done by hand with patience.
But a machine shop can do it if you bring them a D sprocket to match it to.
But a machine shop can do it if you bring them a D sprocket to match it to.
'91 Golf gasser converted to a 12mm pump, M-TDI.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
Re: 97 1.9?
I would use a bridge port and an end mill.
-
- Diesel Freak
- Posts: 169
- Joined: Mon Feb 06, 2006 10:53 am
- Location: Halifax, Nova Scotia, Canada
Re: 97 1.9?
The AAZ has much more torque than the 1.6, but is a bit noisier, particularly when fully built like mine. This is the last of the IDI engines, and uses the same 020 transmission as the 1.6. It's basically a bolt-in in a Mk 1. The TDIs all went to a cable-shifted, hydraulically actuated clutch 02A transmission. A swap is a LOT of work. Iwent simple in my caddy, and am getting 147 horsepower and 255 ft lbs of torque.It's a handfull on a wet dayKCCats wrote:So what makes the AZZ better than the 1.6?
Oh, and I used an early TDI crankshaft. It has the D shaped nose, so problems cured. It's a direct bolt-in.
DC Stewart
Milford Station
Nova Scotia, Canada
Milford Station
Nova Scotia, Canada