I got some good used frybrid 3 port switches, but the guy who gave them to me didn't take them off and so doesn't know which ports are in/out/vege. If anybody has installed any of these could you let me know which is which.
thanks
frybrid switches
Moderator: Fatmobile
frybrid switches
1971 super beetle
1990 t3 transporter 1.9na
1990 t3 transporter 1.9na
-
- Global Moderator
- Posts: 7574
- Joined: Wed Oct 30, 2002 10:28 pm
- Location: north central Iowa
fuel select solenoids
Blow through the ports with no power to the solenoid. The ones that flow are the diesel ports.
you are saying that you can blow through all three ports whether or not there is any power to them? if so then I do not think they are any good, or it may be a result in user error. I could understand one not working, but both is strange. Do you hear anything when you apply 12 volts? (a click or snap). plumbing them up will not make a difference.
1980 two door dasher
1982 Isuzu Pup 4x4 diesel work truck
1968 red Baja Bug-stolen 4-12-2010
1982 Isuzu Pup 4x4 diesel work truck
1968 red Baja Bug-stolen 4-12-2010
i blew into port 1 and flow was through port 3. i applied 12 volts and heard and
felt the valve operate, but there was no change in where the flow was-still
#1 to #3.
called the friend i got them from and we know they were good 2 weeks before. so i installed them under the assurance they would work. spent a few hours trying to get them under the front of the r/f fender, then just jammed them above the rads. THEY DIDN'T WORK. took them apart and both mechanical valves are stuck. i will soak them in diesel or something else to see if they free up. installed 6 port pollak valve instead. works perfect.
felt the valve operate, but there was no change in where the flow was-still
#1 to #3.
called the friend i got them from and we know they were good 2 weeks before. so i installed them under the assurance they would work. spent a few hours trying to get them under the front of the r/f fender, then just jammed them above the rads. THEY DIDN'T WORK. took them apart and both mechanical valves are stuck. i will soak them in diesel or something else to see if they free up. installed 6 port pollak valve instead. works perfect.
1971 super beetle
1990 t3 transporter 1.9na
1990 t3 transporter 1.9na
-
- Turbo Charger
- Posts: 258
- Joined: Sat Aug 28, 2004 4:43 pm
- Location: Allendale, MI
try reversing the power and ground wires and see if it makes a difference
www.archeryprostaffmi.com
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump
1985 GMC pickup 4x4 lift kit and runs 14.625 @ 91mph
1982 VW rabbit pickup 1.6L just rebuilt, 100mm cv's, 02A transmission
1997 Geo Tracker 1.9 TDI-M, variable gate turbo, Giles Pump