looking for part # NEED HELP!

kayakwesty · Post by **kayakwesty** » Mon Jun 04, 2007 8:46 am

I have a 1991 1.6 na diesel.

It has a rotary vacu pump, after the vacu pump, there is a hose, then a plastic piece that "tees" off one tee goes to the I.P. PUMP. then the 2nd tee goes to the heating and air controls

Then it has a main big hose that goes to the brake booster. I broke the plastic tee piece that comes off the Vacu pump.

I need a part #, when I call no one knows what I'm talking about!

tylernt · Post by **tylernt** » Mon Jun 04, 2007 9:47 am

No help on the part #, but you may be able to use rubber vacuum hose, copper plumbing fittings,and hose clamps to rig something up.

rwest1 · Post by **rwest1** » Mon Jun 04, 2007 9:47 am

Looked up in ETKA, and it show as assembly, vacumn pipe W/ check valve Pn 191611931L. no individual pn for T alone. Dealer will want mucho dinero i bet. I would head to junk yard or fix/make the part. Some pipe reducer fittings, and some pieces of hose and you can probably fabricate a serviceable replacement (do it right though, since your brakes are dependent on vacumn for proper operation). Regards

rwest1 · Post by **rwest1** » Mon Jun 04, 2007 9:49 am

tylernt

Talk about timing!!!! Ck. post times!!

kayakwesty · Post by **kayakwesty** » Mon Jun 04, 2007 10:14 am

well I can't go to Junkyard, I'm in Central Alabama, if it's a not jacked-up pickup truck forget it...let alone something that gets good gas mileage!

Thank you for the help

Jack doesn't have the part, so with your help with the part#

(competitor's name removed by moderator).com has it 39 dollars.

THANK YOU FOR YOUR HELP!