What's this fitting coming from my LDA and why is it blocked
Moderator: Fatmobile
-
- Glow Plug
- Posts: 22
- Joined: Thu May 14, 2009 1:35 pm
- Location: Portland, OR
- Contact:
I dig that. For me, turning the screw out decreases the sensitivity of the accelerator pedal. It's almost like my TIG welder pedal. I can set it to max out at 75amps and give me a very precise feel for welding amperage, or I can set it to 200 and *very easily* burn through. Options are cool but I'm an old school hotrodder. I need an external "self control" device and this works for me. I did notice my boost goes to nearly 15psi at times of heavy acceleration. I am working on adjusting the LDA to give me a little more when I really need it.
I need so help the seal explained in this thread is leaking on my pump i dosn't explain the ball bearings
if it has screws i supposed to replace the copper washers but if it ha ball bearing what reaseals it?
Do i buy new ball bearings?
Are there O rings on the pivot shaft if it has ball bearings?
How are the ball bearing version sealed?
Any help would be greatly recived i don want to putit back together to find fuel squirting out
if it has screws i supposed to replace the copper washers but if it ha ball bearing what reaseals it?
Do i buy new ball bearings?
Are there O rings on the pivot shaft if it has ball bearings?
How are the ball bearing version sealed?
Any help would be greatly recived i don want to putit back together to find fuel squirting out
-
- Glow Plug
- Posts: 2
- Joined: Fri Jun 19, 2015 3:40 am
Re: What's this fitting coming from my LDA and why is it blocked
Hi I really need this thread with pictures but they are not being displayed does anyone else have this issue?
-
- Global Moderator
- Posts: 7566
- Joined: Wed Oct 30, 2002 10:28 pm
- Location: north central Iowa
Re: What's this fitting coming from my LDA and why is it blocked
If you have a question ask it.
I've done this repair.
"I need so help the seal explained in this thread is leaking on my pump i dosn't explain the ball bearings
if it has screws i supposed to replace the copper washers but if it ha ball bearing what reaseals it?
Do i buy new ball bearings?
Are there O rings on the pivot shaft if it has ball bearings?
How are the ball bearing version sealed?
Any help would be greatly received i don want to putit back together to find fuel squirting out"
The ball bearings are reused they seal themselves, pressed fit.
You see them in many places on the pump to seal up a passageway.
Soo no o-rings on the pivot shaft.
I've done this repair.
"I need so help the seal explained in this thread is leaking on my pump i dosn't explain the ball bearings
if it has screws i supposed to replace the copper washers but if it ha ball bearing what reaseals it?
Do i buy new ball bearings?
Are there O rings on the pivot shaft if it has ball bearings?
How are the ball bearing version sealed?
Any help would be greatly received i don want to putit back together to find fuel squirting out"
The ball bearings are reused they seal themselves, pressed fit.
You see them in many places on the pump to seal up a passageway.
Soo no o-rings on the pivot shaft.
'91 Golf gasser converted to a 12mm pump, M-TDI.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
-
- Glow Plug
- Posts: 2
- Joined: Fri Jun 19, 2015 3:40 am
Re: What's this fitting coming from my LDA and why is it blocked
Ok iv done eveything in the diy and Iv taken out the guide pin but were in the hek is the oring I need to replace cant see it?
-
- Turbo Charger
- Posts: 1482
- Joined: Tue Sep 28, 2004 8:43 pm
- Location: Canada Southern Alberta
- Contact:
Re: What's this fitting coming from my LDA and why is it blocked
It might have broken in half and lodge itself in another location. If you could see a picture of it, that would confirm this. I'm betting the gentlemen from Michigami has one.
99 TDI Jetta (Z1 engine code)
94 Grand Caravan
89 Dodge Gold Stream B class
http://www.antiquedollhouseofpatterns.ca/
94 Grand Caravan
89 Dodge Gold Stream B class
http://www.antiquedollhouseofpatterns.ca/
-
- Global Moderator
- Posts: 7566
- Joined: Wed Oct 30, 2002 10:28 pm
- Location: north central Iowa
Re: What's this fitting coming from my LDA and why is it blocked
Did you poke around?
Sometimes a brittle old black seal can look like metal.
Sometimes a brittle old black seal can look like metal.
'91 Golf gasser converted to a 12mm pump, M-TDI.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
'84 1.6TD Rabbit with a VNT-15 turbo, still setup to run on vegetable oil.
'84 GTI with 1.7TD pistons and intercooled.
2003 TDI wagon
2000 TDI Jetta.
Re: What's this fitting coming from my LDA and why is it blocked
Is it possible to get the picture of this repair. When I first saw it they were there, now that I am ready to do the repair they are gone.
They were great pictures and very helpful. Thanks
They were great pictures and very helpful. Thanks