Flippin' Fuel Injector pump incompatibility

dvuono · Post by **dvuono** » Thu Mar 04, 2010 8:52 pm

Hey there V-Dub Diesel community,

So I'm in the process of swapping out my old 1.6 injector pump for a beautiful 1.9 turbo pump but the pulleys are not lined up! The pump should be correct as it is for a 1.9 turbo. Do I need to find an offset pulley that would line everything up?

Any suggestions? See photos..

Dave and Patience

dvuono · Post by **dvuono** » Thu Mar 04, 2010 8:56 pm

dvuono · Post by **dvuono** » Thu Mar 04, 2010 8:57 pm

Flip! how do get photos to post on this darn forum!

dvuono · Post by **dvuono** » Thu Mar 04, 2010 9:08 pm

P-it Check out my blog...

http://vwdreamintoreality.blogspot.com/ ... hen-f.html

Post by **Fatmobile** » Thu Mar 04, 2010 10:37 pm

Libbybapa, over on the GTD forum, can help you with this.
He has posted about the differences between the 2 pumps.

caveman · Post by **caveman** » Fri Mar 05, 2010 12:49 pm

I had the same problem when i got a pump made by Giles because i didn't send him the pump i had on the motor ,but another i had lying around. Use a pulley from a 1.6 . It has a deeper offset than the 1.9 pumps and will line everything up.

dvuono · Post by **dvuono** » Fri Mar 05, 2010 11:24 pm

Thanks guys, Just ordered the offset pulley from Giles. Should be here by Monday.